【Profile】
Type：Water Cooled Screw Type Chiller (Standard Type)
Cooling Capacity：110-2200 KW
Product Series：HG Series Screw Type Water Chiller
Chilled Water Outlet Temperature：12℃
Application：Widely used in injection molding, pipe profiles, food processing, pharmaceutical electroplating, chemical, mechanical processing and other industry
【Feature】
◆High Reliability
◇Screw compressors have few parts, no wearing parts, stable and reliable operation, long life.
◇The screw compressor uses a new generation of high-efficiency 5: 6 patented asymmetric tooth shape design to improve work efficiency.
◇Rod-type compressors have a volumetric design with a small clearance volume, small friction losses, and high operating efficiency.
◆Compressor
◇The refrigerant circuit and control circuit are completely independent ,can be used alternately according to loading condition, which can effectively extend the service life. It has the advantages of high efficiency, low energy consumption, low noise, low vibration, wear resistance and high reliability.
◆Condenser
◇Shell and tube condenser, the heat exchange tubes are outer finned copper tube, the cover plates at both ends are removable, can be removed to clean the copper tub, effectively ensure the safe operation of the system. The condenser has passed the national pressure vessel inspection.
◆Evaporator
◇Shell and tube type evaporator adopts inner fin copper tube, and is equipped with refrigerant shunting device, which can evenly distribute the refrigerant to each heat exchange tube, improve heat exchange efficiency. For multi-compressor chiller, each compressor is equipped with an evaporator and a condenser, the three constitute an independent refrigeration system. Due to structural reasons, the water paths of the two evaporators are often connected, but the refrigeration circuits are independent. The exterior of the evaporator is affixed with thermal insulation material to avoid the loss of cooling capacity.
◆Thermal expansion valve
◇The world-renowned brand Emerson thermal expansion valve is used for higher control accuracy, wider adjustment range and faster response. Under any working conditions, the heat exchange area of the evaporator can be fully utilized, the heat exchange is more sufficient, and the efficiency is higher, which can ensure the reliability of the refrigeration system.
【Control System】
◇Start-Stop protection, control compressor starting frequency
◇Equivalent setting of compressor start-stop times and running time
◇Touch Screen Controller
◇Can add remote monitoring, Provide RS485 communication
◇Power-off memory , historical fault query function
◇Overload protection, phase sequence protection, anti-frozen protection, high and low pressure protection, exhaust temperature protection and other protections.
◇Inlet and outlet water temperature control
◇Inlet and outlet water flow
◇Reserved joint control contact of chilled water pump, cooling water pump, cooling tower.
【Certificate】
【Factory Show】
We have our own laboratories and prefessional testing Line. All SANHER chillers are factory tested under load conditions to ensure easy installation for users.
【Package&Shipping】
Plastic film+wood box for export. Shipping by sea, by land or by train.
【FAQ】
Q1: Are you a manufacturer?
A1: Yes, we have more than 10 years experience in water chiller manufacture. New plant was bulit in 2017 in Guangzhou Economic&Technological Development Zone. Welcome to visit us anytime!
Q2: Could you help us to recommend the model for our project?
A2: Yes, we have engineer to check the details and make the scheme for you. Based on the following:
1) Cooling capacity;
2) Refrigerant;
3) Chilled water inlet/outlet temperature
4) Voltage;
5) For what industry
6)The building drawing(if you have)
7)Any other special requirements.
Q3: How to ensure your product with good quality?
A3: We use the well-know brand accessories, such as Hanbell , copeland, danfoss compressor, Emerson expansion Valve, Siemens controller. All SANHER chillers are factory tested under load conditions to ensure good quality and easy installation for users.
Q4: What's the warranty?
A4: 12 months from startup, or 18 month from delivery(what happens first) for free if confirmed by both side damage in the quality reason.
Q5: Whats your payment term?
A5: We accept TT, LC, Western Union, etc. Normally ,30% deposit for production, 70% balance before shipment.
Q6: Can you do the design for us?
A6: Yes we can customize produce the chiller according to user's detail request. Also we can design the cooling system(cooling tower, water pump, water box, FCUs ,etc) for user of you need.
Q7: What about the lead time for production?
A7: For Magnetic Bearing Chiller, normally our production period is 45 working days after receiving deposit. If urgent order we can arrange fast production.
【Contact Us】
Tel:+86 20 31600108
Mobile&Whatsapp: +8613828407068
Email:timchen@gzsanher.com
Hot Tags: water cooled screw type water chiller, China water cooled screw type water chiller manufacturers, suppliers, factory, industrial chiller with special capabilities, industrial chiller for particular applications, industrial chiller for unique industries, scroll chiller for industrial plant cooling, specialized cooling system for temperature control in industry, industrial cooling machinery for special applications
