The screw type chiller is a screw-type chiller because of its screw-type screw-type chiller. The unit is out of the evaporator and is a gas refrigerant. After the compressor is adiabatically compressed, it becomes a high-temperature and high-pressure state. The compressed gas refrigerant is condensed by isostatic cooling in a condenser, and after condensation, it is changed into a liquid refrigerant, and then expanded to a low pressure through a throttle valve to become a gas-liquid mixture. The liquid refrigerant under low temperature and low pressure absorbs the heat of the cold matter in the evaporator and becomes a gaseous refrigerant again. The gaseous refrigerant re-enters the compressor through the pipeline and begins a new cycle. This is the four processes of the refrigeration cycle. It is also the main working principle of the screw chiller.
For the use of screw chillers, some of the common problems that friends will have are high-voltage faults, low-voltage faults, low-valve faults, compressor overheat faults, communication faults, etc., but it is necessary to effectively solve these faults. Firstly, the main working principle of the screw chiller is linked, and among them, the four processes of the refrigeration cycle are the high temperature and high pressure state after the compressor is adiabatically compressed. The compressed gas refrigerant is condensed by isostatic cooling in a condenser, and after condensation, it is changed into a liquid refrigerant, and then expanded to a low pressure through a throttle valve to become a gas-liquid mixture. The liquid refrigerant under low temperature and low pressure absorbs the heat of the cold matter in the evaporator and becomes a gaseous refrigerant again. The gaseous refrigerant re-enters the compressor through the pipeline and begins a new cycle.
