After the installation of the industrial chiller, it is necessary to carry out comprehensive debugging for its equipment in the initial stage of operation. In the way of certification and debugging, it can be found whether there are hidden troubles in the high-efficiency operation of the industrial chiller, if the enterprise can install it. In the initial stage, the safety troubles of industrial chillers are discovered in time, so the industrial chiller has a very low failure rate and consumes less energy.
The effect of debugging the industrial chiller is good or bad, which will directly affect the operating life of the equipment to a certain extent. If the enterprise can find out the faults of its equipment group in a short time, the safety safety factor of the industrial chiller is very high. . Initial installation and operation of industrial chillers can avoid various small faults in the equipment, resulting in serious impact on the operational stability of industrial chillers and even downtime.
The oil temperature control of industrial chillers is very important, and the oil temperature control range of the equipment is about 50-60 °C. When the oil temperature is lower than 50 °C, the oil heater works; if the oil temperature is higher than 55 °C, the oil heater stops working; if the oil temperature exceeds 65 °C, the alarm stops.
